| PART |
Description |
Maker |
| BL02RN1 |
On-Board Type (DC) EMI Suppression Filters
|
Murata
|
| HCB1608K-121T20 HCB2012K-121T20 |
On-Board Type EMI Suppression Filters
|
XP Power
|
| BLM21AG102 BLM15AG102 BLM21PG220 DLW21HN121 NFM41P |
On-Board Type (DC) EMI Suppression Filters
|
MURATA[Murata Manufacturing Co., Ltd.]
|
| NFL21SP106X1C3 NFL21SP706X1C3 NFL18SP NFL18SP157X1 |
On-Board Type (DC) EMI Suppression Filters (EMIFIL)
|
MURATA[Murata Manufacturing Co., Ltd.]
|
| NFL18ST |
(NFL18 / NFL21) On-Board Type (DC) EMI Suppression Filters
|
MURATA
|
| 1F25 |
EMI Suppression Filter; Voltage Rating:275V; Attenuation:30dB; Current Drain:40mA; Leaded Process Compatible:Yes; Peak Reflow Compatible (260 C):No; Phases:Single; Output Type:AC 275 V, SINGLE PHASE EMI FILTER
|
Crydom, Inc.
|
| 70246-4021 |
Header; No. of Contacts:40; Pitch Spacing:2.54mm; No. of Rows:2; Series:C-Grid; Connector Body Material:Polyester; Mounting Type:PC Board; Terminal Type:Straight Pin 40 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
|
Molex, Inc.
|
| 53254-0710 |
Header; No. of Contacts:7; Pitch Spacing:2mm; No. of Rows:1; Series:Micro-Latch; Connector Body Material:Nylon; Mounting Type:PC Board; Terminal Type:Right Angle Pin 7 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER
|
Molex, Inc.
|
| QPI-10-CB1 |
QPI-10LZ Filter Carrier Board for 48 V VI Chip EMI Evaluation
|
Vicor Corporation
|
| VFS9V PLT09H |
EMI Suppression Filters (Lead Type EMIFIL)
|
Murata Manufacturing Co...
|
| 10099100 |
SFP IXI Cage EMI FINGER TYPE
|
FCI connector
|
